{"id":953,"date":"2026-09-11T10:50:00","date_gmt":"2026-09-11T02:50:00","guid":{"rendered":"http:\/\/themetest3.local\/?p=953"},"modified":"2026-11-18T10:27:33","modified_gmt":"2026-11-18T02:27:33","slug":"vape-battery-safety-certification-checklist","status":"publish","type":"post","link":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/","title":{"rendered":"Vape Battery Safety and Certification: A Buyer&#8217;s Checklist"},"content":{"rendered":"\n\n<li>Devices arriving at 100% state of charge.<\/li>\n\n\n\n\n<li>No lot number on the cell or the carton.<\/li>\n\n\n\n\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<\/ul>\n\n\n\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n\n\n\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n\n\n\n<p class=\"wp-block-paragraph\">Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list-item -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Stated capacity that holds up under a 0.2C discharge test, not a marketing number.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Stated capacity that holds up under a 0.2C discharge test, not a marketing number.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>Air transport report.<\/strong> The cargo identification report that accompanies UN38.3 in most air shipments.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>ISO 9001.<\/strong> Not a battery test, but proof that the factory has a documented quality system behind these reports.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list-item -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">What Good Battery Specs Look Like<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Stated capacity that holds up under a 0.2C discharge test, not a marketing number.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>MSDS \/ SDS.<\/strong> Material safety data sheets for both the e-liquid and the battery, needed for customs and for freight forwarders.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>Air transport report.<\/strong> The cargo identification report that accompanies UN38.3 in most air shipments.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>ISO 9001.<\/strong> Not a battery test, but proof that the factory has a documented quality system behind these reports.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">What Good Battery Specs Look Like<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Stated capacity that holds up under a 0.2C discharge test, not a marketing number.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>CE and RoHS.<\/strong> Required for the European market; RoHS also confirms the cell and solder contain no restricted substances.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>MSDS \/ SDS.<\/strong> Material safety data sheets for both the e-liquid and the battery, needed for customs and for freight forwarders.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>Air transport report.<\/strong> The cargo identification report that accompanies UN38.3 in most air shipments.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>ISO 9001.<\/strong> Not a battery test, but proof that the factory has a documented quality system behind these reports.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">What Good Battery Specs Look Like<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Stated capacity that holds up under a 0.2C discharge test, not a marketing number.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>IEC 62133-2.<\/strong> The safety standard for lithium-ion cells and batteries. This is the document that tells you the cell survives abuse conditions.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>CE and RoHS.<\/strong> Required for the European market; RoHS also confirms the cell and solder contain no restricted substances.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>MSDS \/ SDS.<\/strong> Material safety data sheets for both the e-liquid and the battery, needed for customs and for freight forwarders.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>Air transport report.<\/strong> The cargo identification report that accompanies UN38.3 in most air shipments.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>ISO 9001.<\/strong> Not a battery test, but proof that the factory has a documented quality system behind these reports.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">What Good Battery Specs Look Like<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Stated capacity that holds up under a 0.2C discharge test, not a marketing number.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>UN38.3.<\/strong> The UN transport test for lithium batteries: altitude simulation, thermal cycling, vibration, shock, external short circuit, impact, overcharge and forced discharge. Without it, air freight is not legal.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>IEC 62133-2.<\/strong> The safety standard for lithium-ion cells and batteries. This is the document that tells you the cell survives abuse conditions.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>CE and RoHS.<\/strong> Required for the European market; RoHS also confirms the cell and solder contain no restricted substances.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>MSDS \/ SDS.<\/strong> Material safety data sheets for both the e-liquid and the battery, needed for customs and for freight forwarders.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>Air transport report.<\/strong> The cargo identification report that accompanies UN38.3 in most air shipments.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>ISO 9001.<\/strong> Not a battery test, but proof that the factory has a documented quality system behind these reports.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">What Good Battery Specs Look Like<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Stated capacity that holds up under a 0.2C discharge test, not a marketing number.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list-item -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>UN38.3.<\/strong> The UN transport test for lithium batteries: altitude simulation, thermal cycling, vibration, shock, external short circuit, impact, overcharge and forced discharge. Without it, air freight is not legal.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>IEC 62133-2.<\/strong> The safety standard for lithium-ion cells and batteries. This is the document that tells you the cell survives abuse conditions.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>CE and RoHS.<\/strong> Required for the European market; RoHS also confirms the cell and solder contain no restricted substances.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>MSDS \/ SDS.<\/strong> Material safety data sheets for both the e-liquid and the battery, needed for customs and for freight forwarders.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>Air transport report.<\/strong> The cargo identification report that accompanies UN38.3 in most air shipments.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>ISO 9001.<\/strong> Not a battery test, but proof that the factory has a documented quality system behind these reports.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">What Good Battery Specs Look Like<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Stated capacity that holds up under a 0.2C discharge test, not a marketing number.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content --><!-- \/wp:list --><!-- wp:post-content --><!-- wp:paragraph -->\n<p>The cell inside a disposable vape is the component most likely to cause a safety incident and the one buyers inspect least. Certification paperwork is not bureaucracy here \u2014 it is the only evidence that the cell was designed for the way it will be used, stored and shipped.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Why the Cell Decides Device Safety<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>A disposable vape runs a lithium cell at close to its limit for the whole life of the product, often with no protection circuit beyond a simple IC. Cheap cells with exaggerated capacity ratings are the usual cause of overheating, venting and shipping rejections. The specification on the label matters less than the test reports behind it.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Certifications Your Supplier Must Provide<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>UN38.3.<\/strong> The UN transport test for lithium batteries: altitude simulation, thermal cycling, vibration, shock, external short circuit, impact, overcharge and forced discharge. Without it, air freight is not legal.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>IEC 62133-2.<\/strong> The safety standard for lithium-ion cells and batteries. This is the document that tells you the cell survives abuse conditions.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>CE and RoHS.<\/strong> Required for the European market; RoHS also confirms the cell and solder contain no restricted substances.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>MSDS \/ SDS.<\/strong> Material safety data sheets for both the e-liquid and the battery, needed for customs and for freight forwarders.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>Air transport report.<\/strong> The cargo identification report that accompanies UN38.3 in most air shipments.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li><strong>ISO 9001.<\/strong> Not a battery test, but proof that the factory has a documented quality system behind these reports.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">What Good Battery Specs Look Like<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Stated capacity that holds up under a 0.2C discharge test, not a marketing number.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Protection against overcharge, over-discharge and short circuit.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>A documented cycle life figure, typically expressed as capacity retention after several hundred cycles.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Consistent cell supplier across production lots \u2014 not whatever is available that week.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Six Signs of a Weak Battery Supply Chain<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:list -->\n<ul><!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No UN38.3 report, or a report belonging to a different cell model.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Capacity claims that no datasheet supports.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Battery supplier changes between samples and mass production.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Devices arriving at 100% state of charge.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>No lot number on the cell or the carton.<\/li>\n<!-- \/wp:list-item -->\n\n<!-- wp:list-item -->\n<!-- wp:list-item -->\n<li>Reluctance to name the cell manufacturer at all.<\/li>\n<!-- \/wp:list-item --><\/ul>\n<!-- \/wp:list -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Tests You Can Request Before Mass Production<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Beyond the certificates, ask for a small test set from the pilot run: overcharge, external short circuit, drop test, high and low temperature storage, and a capacity verification at the rated discharge rate. A factory that runs these routinely will send results quickly. One that does not will send excuses.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Storage and Shipping Notes<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Lithium cells shipped by air should leave the factory at roughly 30% state of charge, and finished goods should be stored away from heat and direct sunlight. Confirm in writing that your supplier follows this \u2014 it affects both safety and whether the forwarder accepts the shipment.<\/p>\n<!-- \/wp:paragraph -->\n\n<!-- wp:heading -->\n<h2 class=\"wp-block-heading\">Before You Place the Order<\/h2>\n<!-- \/wp:heading -->\n\n<!-- wp:paragraph -->\n<p>Ask for the full document pack \u2014 UN38.3, IEC 62133-2, MSDS, air transport report \u2014 for the exact cell model in your product, not a generic certificate. If you would like the documentation set for our current device range, contact us and we will send it with the corresponding spec sheets.<\/p>\n<!-- \/wp:paragraph --><!-- \/wp:post-content -->","protected":false},"excerpt":{"rendered":"<p>UN38.3, IEC 62133-2, CE, RoHS and MSDS explained \u2014 which battery documents a vape buyer should receive, and the tests worth requesting before mass production.<\/p>\n","protected":false},"author":1,"featured_media":1195,"comment_status":"open","ping_status":"open","sticky":false,"template":"","format":"standard","meta":{"_monsterinsights_skip_tracking":false,"themepark_post_bcolor":"#f5f5f5","themepark_post_width":"1022px","themepark_post_img":"","themepark_post_img_po":"left","themepark_post_img_re":false,"themepark_post_img_cover":false,"themepark_post_img_fixed":false,"themepark_post_hide_title":false,"themepark_post_main_b":"","themepark_post_main_p":100,"themepark_paddingblock":false,"_geo_short_summary":"","_geo_structured_desc":"","_geo_faqs":"","_geo_key_points":"","_geo_target_audience":"","_geo_content_type":"","_geo_last_modified":"","_geo_version":0,"themepark_seo_title":"Vape Battery Safety and Certification Checklist for Buyers","themepark_seo_description":"Which battery certifications a disposable vape supplier must provide, what each one covers, and the tests to request before mass production.","footnotes":""},"categories":[12],"tags":[],"class_list":["post-953","post","type-post","status-publish","format-standard","has-post-thumbnail","hentry","category-faq"],"metadata":{"catce":["sidebar-widgets4"],"views":["61"],"_thumbnail_id":["1195"],"_dp_original":["952"],"themepark_seo_title":["Vape Battery Safety and Certification Checklist for Buyers"],"themepark_seo_description":["Which battery certifications a disposable vape supplier must provide, what each one covers, and the tests to request before mass production."],"themepark_seo_keyword":[""],"_wxr_import_has_attachment_refs":["1"],"_wp_old_slug":["offer-guided-tours-for-city-sightseeing-6"],"_aioseo_title":["Vape Battery Safety and Certification Checklist for Buyers"],"_aioseo_description":["Which battery certifications a disposable vape supplier must provide, what each one covers, and the tests to request before mass production."]},"aioseo_notices":[],"aioseo_head":"\n\t\t<!-- All in One SEO 5.0.0.1 - aioseo.com -->\n\t<meta name=\"description\" content=\"UN38.3, IEC 62133-2, CE, RoHS and MSDS explained \u2014 which battery documents a vape buyer should receive, and the tests worth requesting before mass production.\" \/>\n\t<meta name=\"robots\" content=\"max-image-preview:large\" \/>\n\t<meta name=\"author\" content=\"provape\"\/>\n\t<link rel=\"canonical\" href=\"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/\" \/>\n\t<meta name=\"generator\" content=\"All in One SEO (AIOSEO) 5.0.0.1\" \/>\n\t\t<meta property=\"og:locale\" content=\"en_US\" \/>\n\t\t<meta property=\"og:site_name\" content=\"PRO VAPE Factory -\" \/>\n\t\t<meta property=\"og:type\" content=\"article\" \/>\n\t\t<meta property=\"og:title\" content=\"Vape Battery Safety and Certification: A Buyer\u2019s Checklist - PRO VAPE Factory\" \/>\n\t\t<meta property=\"og:description\" content=\"UN38.3, IEC 62133-2, CE, RoHS and MSDS explained \u2014 which battery documents a vape buyer should receive, and the tests worth requesting before mass production.\" \/>\n\t\t<meta property=\"og:url\" content=\"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/\" \/>\n\t\t<meta property=\"article:published_time\" content=\"2026-09-11T02:50:00+00:00\" \/>\n\t\t<meta property=\"article:modified_time\" content=\"2026-11-18T02:27:33+00:00\" \/>\n\t\t<meta name=\"twitter:card\" content=\"summary_large_image\" \/>\n\t\t<meta name=\"twitter:title\" content=\"Vape Battery Safety and Certification: A Buyer\u2019s Checklist - PRO VAPE Factory\" \/>\n\t\t<meta name=\"twitter:description\" content=\"UN38.3, IEC 62133-2, CE, RoHS and MSDS explained \u2014 which battery documents a vape buyer should receive, and the tests worth requesting before mass production.\" \/>\n\t\t<script type=\"application\/ld+json\" class=\"aioseo-schema\">\n\t\t\t{\"@context\":\"https:\\\/\\\/schema.org\",\"@graph\":[{\"@type\":\"BlogPosting\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#blogposting\",\"name\":\"Vape Battery Safety and Certification: A Buyer\\u2019s Checklist - PRO VAPE Factory\",\"headline\":\"Vape Battery Safety and Certification: A Buyer&#8217;s Checklist\",\"author\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/author\\\/provape\\\/#author\"},\"publisher\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/#organization\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.yzdvape.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/vape-battery-safety-testing.jpg\",\"width\":1536,\"height\":962,\"caption\":\"vape battery safety testing\"},\"datePublished\":\"2026-09-11T10:50:00+08:00\",\"dateModified\":\"2026-11-18T10:27:33+08:00\",\"inLanguage\":\"en-US\",\"mainEntityOfPage\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#webpage\"},\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#webpage\"},\"articleSection\":\"FAQ\"},{\"@type\":\"BreadcrumbList\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#breadcrumblist\",\"itemListElement\":[{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.yzdvape.com#listItem\",\"position\":1,\"name\":\"Home\",\"item\":\"https:\\\/\\\/www.yzdvape.com\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/category\\\/faq\\\/#listItem\",\"name\":\"FAQ\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/category\\\/faq\\\/#listItem\",\"position\":2,\"name\":\"FAQ\",\"item\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/category\\\/faq\\\/\",\"nextItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#listItem\",\"name\":\"Vape Battery Safety and Certification: A Buyer&#8217;s Checklist\"},\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.yzdvape.com#listItem\",\"name\":\"Home\"}},{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#listItem\",\"position\":3,\"name\":\"Vape Battery Safety and Certification: A Buyer&#8217;s Checklist\",\"previousItem\":{\"@type\":\"ListItem\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/category\\\/faq\\\/#listItem\",\"name\":\"FAQ\"}}]},{\"@type\":\"Organization\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/#organization\",\"name\":\"PRO VAPE Factory\",\"url\":\"https:\\\/\\\/www.yzdvape.com\\\/\"},{\"@type\":\"Person\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/author\\\/provape\\\/#author\",\"url\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/author\\\/provape\\\/\",\"name\":\"provape\",\"image\":{\"@type\":\"ImageObject\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#authorImage\",\"url\":\"https:\\\/\\\/secure.gravatar.com\\\/avatar\\\/57128b4a00fa2713f9c2e16d0e6ec47ed470ec3e2f2bcb8167ba7d726bc208ae?s=96&d=mm&r=g\",\"width\":96,\"height\":96,\"caption\":\"provape\"}},{\"@type\":\"WebPage\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#webpage\",\"url\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/\",\"name\":\"Vape Battery Safety and Certification: A Buyer\\u2019s Checklist - PRO VAPE Factory\",\"description\":\"UN38.3, IEC 62133-2, CE, RoHS and MSDS explained \\u2014 which battery documents a vape buyer should receive, and the tests worth requesting before mass production.\",\"inLanguage\":\"en-US\",\"isPartOf\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/#website\"},\"breadcrumb\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#breadcrumblist\"},\"author\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/author\\\/provape\\\/#author\"},\"creator\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/author\\\/provape\\\/#author\"},\"image\":{\"@type\":\"ImageObject\",\"url\":\"https:\\\/\\\/www.yzdvape.com\\\/wp-content\\\/uploads\\\/2026\\\/11\\\/vape-battery-safety-testing.jpg\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#mainImage\",\"width\":1536,\"height\":962,\"caption\":\"vape battery safety testing\"},\"primaryImageOfPage\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/index.php\\\/2026\\\/09\\\/11\\\/vape-battery-safety-certification-checklist\\\/#mainImage\"},\"datePublished\":\"2026-09-11T10:50:00+08:00\",\"dateModified\":\"2026-11-18T10:27:33+08:00\"},{\"@type\":\"WebSite\",\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/#website\",\"url\":\"https:\\\/\\\/www.yzdvape.com\\\/\",\"name\":\"PRO VAPE Factory\",\"inLanguage\":\"en-US\",\"publisher\":{\"@id\":\"https:\\\/\\\/www.yzdvape.com\\\/#organization\"}}]}\n\t\t<\/script>\n\t\t<!-- All in One SEO -->\n\n","aioseo_head_json":{"title":"Vape Battery Safety and Certification: A Buyer\u2019s Checklist - PRO VAPE Factory","description":"UN38.3, IEC 62133-2, CE, RoHS and MSDS explained \u2014 which battery documents a vape buyer should receive, and the tests worth requesting before mass production.","canonical_url":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/","robots":"max-image-preview:large","keywords":"","webmasterTools":{"miscellaneous":""},"schema":{"@context":"https:\/\/schema.org","@graph":[{"@type":"BlogPosting","@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#blogposting","name":"Vape Battery Safety and Certification: A Buyer\u2019s Checklist - PRO VAPE Factory","headline":"Vape Battery Safety and Certification: A Buyer&#8217;s Checklist","author":{"@id":"https:\/\/www.yzdvape.com\/index.php\/author\/provape\/#author"},"publisher":{"@id":"https:\/\/www.yzdvape.com\/#organization"},"image":{"@type":"ImageObject","url":"https:\/\/www.yzdvape.com\/wp-content\/uploads\/2026\/11\/vape-battery-safety-testing.jpg","width":1536,"height":962,"caption":"vape battery safety testing"},"datePublished":"2026-09-11T10:50:00+08:00","dateModified":"2026-11-18T10:27:33+08:00","inLanguage":"en-US","mainEntityOfPage":{"@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#webpage"},"isPartOf":{"@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#webpage"},"articleSection":"FAQ"},{"@type":"BreadcrumbList","@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#breadcrumblist","itemListElement":[{"@type":"ListItem","@id":"https:\/\/www.yzdvape.com#listItem","position":1,"name":"Home","item":"https:\/\/www.yzdvape.com","nextItem":{"@type":"ListItem","@id":"https:\/\/www.yzdvape.com\/index.php\/category\/faq\/#listItem","name":"FAQ"}},{"@type":"ListItem","@id":"https:\/\/www.yzdvape.com\/index.php\/category\/faq\/#listItem","position":2,"name":"FAQ","item":"https:\/\/www.yzdvape.com\/index.php\/category\/faq\/","nextItem":{"@type":"ListItem","@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#listItem","name":"Vape Battery Safety and Certification: A Buyer&#8217;s Checklist"},"previousItem":{"@type":"ListItem","@id":"https:\/\/www.yzdvape.com#listItem","name":"Home"}},{"@type":"ListItem","@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#listItem","position":3,"name":"Vape Battery Safety and Certification: A Buyer&#8217;s Checklist","previousItem":{"@type":"ListItem","@id":"https:\/\/www.yzdvape.com\/index.php\/category\/faq\/#listItem","name":"FAQ"}}]},{"@type":"Organization","@id":"https:\/\/www.yzdvape.com\/#organization","name":"PRO VAPE Factory","url":"https:\/\/www.yzdvape.com\/"},{"@type":"Person","@id":"https:\/\/www.yzdvape.com\/index.php\/author\/provape\/#author","url":"https:\/\/www.yzdvape.com\/index.php\/author\/provape\/","name":"provape","image":{"@type":"ImageObject","@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#authorImage","url":"https:\/\/secure.gravatar.com\/avatar\/57128b4a00fa2713f9c2e16d0e6ec47ed470ec3e2f2bcb8167ba7d726bc208ae?s=96&d=mm&r=g","width":96,"height":96,"caption":"provape"}},{"@type":"WebPage","@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#webpage","url":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/","name":"Vape Battery Safety and Certification: A Buyer\u2019s Checklist - PRO VAPE Factory","description":"UN38.3, IEC 62133-2, CE, RoHS and MSDS explained \u2014 which battery documents a vape buyer should receive, and the tests worth requesting before mass production.","inLanguage":"en-US","isPartOf":{"@id":"https:\/\/www.yzdvape.com\/#website"},"breadcrumb":{"@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#breadcrumblist"},"author":{"@id":"https:\/\/www.yzdvape.com\/index.php\/author\/provape\/#author"},"creator":{"@id":"https:\/\/www.yzdvape.com\/index.php\/author\/provape\/#author"},"image":{"@type":"ImageObject","url":"https:\/\/www.yzdvape.com\/wp-content\/uploads\/2026\/11\/vape-battery-safety-testing.jpg","@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#mainImage","width":1536,"height":962,"caption":"vape battery safety testing"},"primaryImageOfPage":{"@id":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/#mainImage"},"datePublished":"2026-09-11T10:50:00+08:00","dateModified":"2026-11-18T10:27:33+08:00"},{"@type":"WebSite","@id":"https:\/\/www.yzdvape.com\/#website","url":"https:\/\/www.yzdvape.com\/","name":"PRO VAPE Factory","inLanguage":"en-US","publisher":{"@id":"https:\/\/www.yzdvape.com\/#organization"}}]},"og:locale":"en_US","og:site_name":"PRO VAPE Factory -","og:type":"article","og:title":"Vape Battery Safety and Certification: A Buyer\u2019s Checklist - PRO VAPE Factory","og:description":"UN38.3, IEC 62133-2, CE, RoHS and MSDS explained \u2014 which battery documents a vape buyer should receive, and the tests worth requesting before mass production.","og:url":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/","article:published_time":"2026-09-11T02:50:00+00:00","article:modified_time":"2026-11-18T02:27:33+00:00","twitter:card":"summary_large_image","twitter:title":"Vape Battery Safety and Certification: A Buyer\u2019s Checklist - PRO VAPE Factory","twitter:description":"UN38.3, IEC 62133-2, CE, RoHS and MSDS explained \u2014 which battery documents a vape buyer should receive, and the tests worth requesting before mass production."},"aioseo_meta_data":{"post_id":"953","title":null,"description":null,"keywords":null,"keyphrases":{"focus":[],"additional":[]},"focus_keyword":null,"additional_keywords":null,"truseo_locale":null,"primary_term":null,"canonical_url":null,"og_title":null,"og_description":null,"og_object_type":"default","og_image_type":"default","og_image_custom_url":null,"og_image_custom_fields":null,"og_image_url":null,"og_image_width":null,"og_image_height":null,"og_video":null,"og_custom_url":null,"og_article_section":null,"og_article_tags":null,"twitter_use_og":false,"twitter_card":"default","twitter_image_type":"default","twitter_image_custom_url":null,"twitter_image_custom_fields":null,"twitter_image_url":null,"twitter_title":null,"twitter_description":null,"schema_type":"default","schema_type_options":null,"schema":{"blockGraphs":[],"customGraphs":[],"default":{"data":{"Article":[],"Course":[],"Dataset":[],"FAQPage":[],"Movie":[],"Person":[],"Product":[],"ProductReview":[],"Car":[],"Recipe":[],"Service":[],"SoftwareApplication":[],"WebPage":[]},"graphName":"","isEnabled":true},"graphs":[]},"pillar_content":false,"robots_default":true,"robots_noindex":false,"robots_noarchive":false,"robots_nosnippet":false,"robots_nofollow":false,"robots_noimageindex":false,"robots_noodp":false,"robots_notranslate":false,"robots_max_snippet":null,"robots_max_videopreview":null,"robots_max_imagepreview":"large","priority":null,"frequency":null,"local_seo":null,"limit_modified_date":false,"ai":null,"breadcrumb_settings":null,"seo_analyzer_scan_date":null,"created":"2026-08-14 06:26:07","updated":"2026-11-18 09:17:09"},"aioseo_breadcrumb":"<div class=\"aioseo-breadcrumbs\"><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.yzdvape.com\" title=\"Home\">Home<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\t<a href=\"https:\/\/www.yzdvape.com\/index.php\/category\/faq\/\" title=\"FAQ\">FAQ<\/a>\n\t\t<\/span><span class=\"aioseo-breadcrumb-separator\">&raquo;<\/span><span class=\"aioseo-breadcrumb\">\n\t\t\tVape Battery Safety and Certification: A Buyer\u2019s Checklist\n\t\t<\/span><\/div>","aioseo_breadcrumb_json":[{"label":"Home","link":"https:\/\/www.yzdvape.com"},{"label":"FAQ","link":"https:\/\/www.yzdvape.com\/index.php\/category\/faq\/"},{"label":"Vape Battery Safety and Certification: A Buyer&#8217;s Checklist","link":"https:\/\/www.yzdvape.com\/index.php\/2026\/09\/11\/vape-battery-safety-certification-checklist\/"}],"medium_url":"https:\/\/www.yzdvape.com\/wp-content\/uploads\/2026\/11\/vape-battery-safety-testing-300x188.jpg","thumbnail_url":"https:\/\/www.yzdvape.com\/wp-content\/uploads\/2026\/11\/vape-battery-safety-testing-150x150.jpg","full_url":"https:\/\/www.yzdvape.com\/wp-content\/uploads\/2026\/11\/vape-battery-safety-testing.jpg","_links":{"self":[{"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/posts\/953","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/posts"}],"about":[{"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/types\/post"}],"author":[{"embeddable":true,"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/users\/1"}],"replies":[{"embeddable":true,"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/comments?post=953"}],"version-history":[{"count":1,"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/posts\/953\/revisions"}],"predecessor-version":[{"id":1203,"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/posts\/953\/revisions\/1203"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/media\/1195"}],"wp:attachment":[{"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/media?parent=953"}],"wp:term":[{"taxonomy":"category","embeddable":true,"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/categories?post=953"},{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.yzdvape.com\/index.php\/wp-json\/wp\/v2\/tags?post=953"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}