Search: Search

Private Label Vape Packaging: MOQ, Design and Compliance

FAQ 570
  • Manufacturer or importer identification, depending on destination.
  • Child-resistant opening where the market requires it.
  • Ingredient or composition declaration where applicable.
  • Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

  • Batch code and production date.
  • Manufacturer or importer identification, depending on destination.
  • Child-resistant opening where the market requires it.
  • Ingredient or composition declaration where applicable.
  • Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

  • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
  • Batch code and production date.
  • Manufacturer or importer identification, depending on destination.
  • Child-resistant opening where the market requires it.
  • Ingredient or composition declaration where applicable.
  • Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

  • Blister cards — lower cost, popular in markets with limited retail space.
  • Metal tins — positioned as premium, used for higher-end pod systems.
  • Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

  • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
  • Blister cards — lower cost, popular in markets with limited retail space.
  • Metal tins — positioned as premium, used for higher-end pod systems.
  • Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

  • Multi-pack cartons — five or ten devices, common in wholesale channels.
  • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
  • Blister cards — lower cost, popular in markets with limited retail space.
  • Metal tins — positioned as premium, used for higher-end pod systems.
  • Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

  • Custom printed box. Typically 3,000 units per design, because printing plates and die-lines have to be amortized.
  • Special finishes. Foil stamping, embossing and spot UV push MOQ higher and add tooling cost.
  • Combining several flavors under one box design is the usual way to reach a printer’s minimum without over-ordering a single SKU.

    Packaging Formats in Use

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    • Standard packaging with printed label. The lowest threshold, often around 1,000 units per flavor.
    • Custom printed box. Typically 3,000 units per design, because printing plates and die-lines have to be amortized.
    • Special finishes. Foil stamping, embossing and spot UV push MOQ higher and add tooling cost.

    Combining several flavors under one box design is the usual way to reach a printer’s minimum without over-ordering a single SKU.

    Packaging Formats in Use

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    • Standard packaging with printed label. The lowest threshold, often around 1,000 units per flavor.
    • Custom printed box. Typically 3,000 units per design, because printing plates and die-lines have to be amortized.
    • Special finishes. Foil stamping, embossing and spot UV push MOQ higher and add tooling cost.

    Combining several flavors under one box design is the usual way to reach a printer’s minimum without over-ordering a single SKU.

    Packaging Formats in Use

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

  • Leaflet or information card with instructions and warnings.
  • Security or authenticity label with a batch-linked code.
  • MOQ: What to Expect

    Three variables set the minimum order quantity: the device platform, the flavor range and the packaging process.

    • Standard packaging with printed label. The lowest threshold, often around 1,000 units per flavor.
    • Custom printed box. Typically 3,000 units per design, because printing plates and die-lines have to be amortized.
    • Special finishes. Foil stamping, embossing and spot UV push MOQ higher and add tooling cost.

    Combining several flavors under one box design is the usual way to reach a printer’s minimum without over-ordering a single SKU.

    Packaging Formats in Use

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

  • Inner tray or blister that holds the device in place.
  • Leaflet or information card with instructions and warnings.
  • Security or authenticity label with a batch-linked code.
  • MOQ: What to Expect

    Three variables set the minimum order quantity: the device platform, the flavor range and the packaging process.

    • Standard packaging with printed label. The lowest threshold, often around 1,000 units per flavor.
    • Custom printed box. Typically 3,000 units per design, because printing plates and die-lines have to be amortized.
    • Special finishes. Foil stamping, embossing and spot UV push MOQ higher and add tooling cost.

    Combining several flavors under one box design is the usual way to reach a printer’s minimum without over-ordering a single SKU.

    Packaging Formats in Use

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

  • Retail box: structure, print, foil or spot UV, window film.
  • Inner tray or blister that holds the device in place.
  • Leaflet or information card with instructions and warnings.
  • Security or authenticity label with a batch-linked code.
  • MOQ: What to Expect

    Three variables set the minimum order quantity: the device platform, the flavor range and the packaging process.

    • Standard packaging with printed label. The lowest threshold, often around 1,000 units per flavor.
    • Custom printed box. Typically 3,000 units per design, because printing plates and die-lines have to be amortized.
    • Special finishes. Foil stamping, embossing and spot UV push MOQ higher and add tooling cost.

    Combining several flavors under one box design is the usual way to reach a printer’s minimum without over-ordering a single SKU.

    Packaging Formats in Use

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    • Device branding: silk-screen, UV printing or laser marking on the shell.
    • Retail box: structure, print, foil or spot UV, window film.
    • Inner tray or blister that holds the device in place.
    • Leaflet or information card with instructions and warnings.
    • Security or authenticity label with a batch-linked code.

    MOQ: What to Expect

    Three variables set the minimum order quantity: the device platform, the flavor range and the packaging process.

    • Standard packaging with printed label. The lowest threshold, often around 1,000 units per flavor.
    • Custom printed box. Typically 3,000 units per design, because printing plates and die-lines have to be amortized.
    • Special finishes. Foil stamping, embossing and spot UV push MOQ higher and add tooling cost.

    Combining several flavors under one box design is the usual way to reach a printer’s minimum without over-ordering a single SKU.

    Packaging Formats in Use

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    • Device branding: silk-screen, UV printing or laser marking on the shell.
    • Retail box: structure, print, foil or spot UV, window film.
    • Inner tray or blister that holds the device in place.
    • Leaflet or information card with instructions and warnings.
    • Security or authenticity label with a batch-linked code.

    MOQ: What to Expect

    Three variables set the minimum order quantity: the device platform, the flavor range and the packaging process.

    • Standard packaging with printed label. The lowest threshold, often around 1,000 units per flavor.
    • Custom printed box. Typically 3,000 units per design, because printing plates and die-lines have to be amortized.
    • Special finishes. Foil stamping, embossing and spot UV push MOQ higher and add tooling cost.

    Combining several flavors under one box design is the usual way to reach a printer’s minimum without over-ordering a single SKU.

    Packaging Formats in Use

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    Private label is often sold as “your logo on our device”, but the packaging is where most of the real work sits. Retailers judge the box before they judge the vapor, and regulators read the label before they read anything else.

    What Private Label Actually Covers

    • Device branding: silk-screen, UV printing or laser marking on the shell.
    • Retail box: structure, print, foil or spot UV, window film.
    • Inner tray or blister that holds the device in place.
    • Leaflet or information card with instructions and warnings.
    • Security or authenticity label with a batch-linked code.

    MOQ: What to Expect

    Three variables set the minimum order quantity: the device platform, the flavor range and the packaging process.

    • Standard packaging with printed label. The lowest threshold, often around 1,000 units per flavor.
    • Custom printed box. Typically 3,000 units per design, because printing plates and die-lines have to be amortized.
    • Special finishes. Foil stamping, embossing and spot UV push MOQ higher and add tooling cost.

    Combining several flavors under one box design is the usual way to reach a printer’s minimum without over-ordering a single SKU.

    Packaging Formats in Use

    • Single-device carton — the standard retail unit for disposables.
    • Multi-pack cartons — five or ten devices, common in wholesale channels.
    • Counter display boxes — designed to sit on a shelf and hold multiple flavors.
    • Blister cards — lower cost, popular in markets with limited retail space.
    • Metal tins — positioned as premium, used for higher-end pod systems.

    Label Elements You Cannot Skip

    • Nicotine concentration with total nicotine content per device, in the units required by the market.
    • Health warning sized to the share of the panel the regulation specifies — measured, not estimated.
    • Batch code and production date.
    • Manufacturer or importer identification, depending on destination.
    • Child-resistant opening where the market requires it.
    • Ingredient or composition declaration where applicable.

    Design Workflow and Lead Time

    A clean workflow runs: structural choice, dieline issued, artwork laid out against the dieline, compliance text checked against the destination market, digital proof approval, physical proof (often called a white sample or printed dummy), then printing and die-cutting. Budget one to two weeks for artwork and proof rounds, and two to three weeks for print production. Approving artwork before checking the warning panel dimensions is the most expensive shortcut in private label.

    Starting a Private Label Project

    Send us your brand name, target markets, flavor range and expected first order volume. We will send back dielines, MOQ levels per packaging option and a compliance checklist for each destination — so the box you approve is the box that clears customs.

    Previous:

    Related articles

    Hello!Log in

    Click to cancel reply
      Show more